Browse all practice questions for the Land Surveyor in Training (LSIT) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Land Surveyor in Training (LSIT) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • OPUS computes coordinates using which network?
  • A close in leveling is defined as what?
  • Which technique is used to establish elevations on project control points?
  • Conical projection produces which type of map and distortion pattern?
  • Real-time kinematic requires a radio frequency link between a base station and the
  • To achieve 2nd Order accuracy, what is the required vertical accuracy specification for 1 km of double-run leveling without a micrometer?
  • If ellipsoid height h and geoid height N are known, how is orthometric height H computed?
  • Which category of error in measurements arises from human judgment or bias?
  • What best describes a turning point (TP) in the leveling process?
  • Primary project control involves which elements to establish control near and beyond the project site?
  • A Subdivision Plat is best described as which?
  • Which activity is a stated focus of the comprehensive plan?
  • Which statement best describes the bearing of a line?
  • Hub stakes are protected by which types of stakes?
  • The Elevation Factor equation EF = R/(R+H+N) implies what about distortion at high elevations?
  • Which statement best describes a Construction Survey?
  • The Height of Collimation is defined as what?
  • Which description defines a turning point (TP) in leveling?
  • Dilution Of Precision (DOP) is a measure reflecting which factor most directly?
  • State Plane coordinates are always found as:
  • Which of the following is an example of a tidal datum?
  • What is the projection called when the scale is the same in any direction at a point?
  • What data outputs are produced by combining LiDAR and photogrammetry when collected by UAS?
  • Error sources for GPS usage are a. Satellite clock b. Ionosphere c. Receiver clock d. Satellite orbit e. Lower atmosphere f. Multipath. Which of the following is NOT listed as an error source?
  • Which of the following describes a rhumb line’s cross-meridian behavior?
  • In the simple three-parameter datum conversion method, how many origin offsets are used?
  • GPS coordinates calculated when satellites are clustered close together in the sky is described as:
  • Which of the following is NOT listed as a purpose of the comprehensive plan?
  • Which of the following is a primary purpose of the local comprehensive plan?
  • NAD27 and NAD83 are examples of which type of datum?
  • Cylindrical projection produces which type of map and distortion pattern?
  • Horizontal control surveys are established for which type of projects?
  • The State Plane Coordinate System (SPS or SPCS) is a set of 124 geographic zones or coordinate systems designed for what?
  • Field record keeping and documentation should include which items?
  • For vertical/elevation heights, to which datum should the geodetic datum be referenced?
  • Boundaries of state plane zones usually follow which feature?
  • Which statement about GNSS equipment is true?
  • Which statement about guard stakes is correct?
  • Laser scanning is particularly advantageous for which BIM-related tasks?
  • What is the primary purpose of a control survey?
  • What is the approximate speed of light in the atmosphere used in GPS distance calculations?
  • Which of the following best describes the function of a route survey in practice?
  • What does the network positional accuracy of a control point quantify?
  • Elevation or Floodplain Survey determines what?
  • What does the raster data model use to represent locations on the earth?
  • What is the main goal of field operations and computations?
  • Which acts laid the basic foundation for land development controls in the United States?
  • The reported local accuracy is an approximate average of the local accuracy values between this control point and other observed control points used to establish coordinates.
  • Differential leveling is the method of measuring which?
  • Azimuth values typically vary over what range?
  • What is the purpose of a witness stake?
  • What is the geoid?
  • In a static GPS survey, where is the base receiver placed?
  • In leveling, the last observation is called a foresight. Which of the following is the correct designation for the last observation?
  • On a conformal map, meridians (lines of longitude) and parallels (lines of latitude) intersect at what angle?
  • Field Run Topographic Survey is the appropriate survey when which features are needed?
  • A Total Station combines which functionalities?
  • The work of the surveyor is divided into which three phases?
  • Metes and Bounds description describes which aspect of a property?
  • In RTK surveys, how are differential corrections received?
  • Robotic Total Stations enable what capability compared to conventional total stations?
  • Geodetic datums and the coordinate reference systems were developed to describe geographic positions for:
  • A run in leveling is defined as what?
  • Which are examples of tidal datums?
  • Which of the following is a route survey used for alignment of linear features?
  • A rhumb line is also known as which term?
  • Which practice is typical for construction surveys?
  • The horizontal datum is used to measure a position on the Earth's surface in coordinate systems such as latitude and longitude. Which statement best reflects this?
  • Which map projection is NOT used to transform latitude and longitude into x (Easting) and y (Northing) coordinates?
  • FS stands for which leveling term?
  • Along horizontal and vertical curve alignments, alignment stakes are placed how often?
  • GNSS is a satellite-based system used to determine which geographic quantities?
  • Planar projection produces which shape?
  • What does a Quantity Survey primarily measure?
  • A GPS signal travel time from the receiver to the satellite is 67 milliseconds. Using a speed of light in the atmosphere of 186,000 miles per second, what is the approximate distance?
  • Which data model uses points and line segments to identify locations on the earth?
  • What is magnetic declination?
  • How frequently are alignment stakes placed along tangents with uniform grade?
  • Floodplain is defined as which?
  • What minimum specifications are required for GNSS receivers in surveying?
  • Which statement best describes tidal datums?
  • Which technique shall be utilized to establish elevations on the required project control points?
  • Which of the following is NOT a source of GPS error among common factors?
  • The local positional accuracy of a control point is a number that represents the uncertainty at the 95% confidence level in coordinates relative to what?
  • The elevation factor EF is defined as EF = R / (R + H + N). In the denominator, which terms are added to R?
  • What is the generally accepted definition of land development?
  • Which statement best describes horizontal datums?
  • Laser scanning in surveying is primarily used to?
  • A map projection that preserves angles locally but distorts other properties is known as?
  • Which term describes the surface of the oceans that would exist under gravity and rotation alone?
  • Which method is used to study the effects of Earth's gravitational field from space-based observations?
  • Which statement about Cylindrical Equal-Area projections is true?
  • What is the field book used for in surveying?
  • Which statement correctly describes the foresight (FS) reading?
  • Datum conversions are accomplished by various methods. Complete datum conversion is based on seven parameter transformations that include:
  • Which statement best describes static GPS surveying?
  • The Line of Colimation is what?
  • Which system provides the geodetic datum for horizontal coordinates in this context?
  • Which value is used for Earth’s radius R in the EF calculation example?
  • What is a geodetic datum?
  • A horizontal line is one that is:
  • What is the Height of Instrument (HI) in leveling?
  • Latitude lines measure what?
  • Astronomic azimuth is based on which reference?
  • Which of the following best describes the seven-parameter datum transformation?
  • In leveling, the first observation is to a known point and is termed a backsight. Which of the following is the correct designation for the first observation?
  • Precise leveling is characterized by which statement?
  • What is the primary purpose of an As-Built Survey?
  • What is the minimum number of NGS First or Second Order benchmarks required to establish the Elevation/Vertical control network?
  • What is the elevation factor value for Earth’s radius R = 20,906,000 ft and local elevation H = 6,320 ft?
  • How is the Grid-Magnetic angle typically depicted on a map?
  • A rhumb line is a path with constant bearing as measured relative to which reference?
  • Geodetic datums define the:
  • Topographic surveys are primarily intended to map which aspects?
  • In the EF example, the local elevation used is?
  • What is the minimum accuracy class/order for all level work?
  • What is a backsight (BS) in differential leveling?
  • Horizontal control surveys, whenever feasible, are based on which type of observations?
  • The map projection that distorts scale and distance except along the standard parallel is:
  • Land Title refers to which of the following?
  • Which statement correctly describes outward and return runs in leveling?
  • What is the purpose of combining GNSS with ground-based control monuments and Continuously Operating Reference Stations (CORS) in surveying?
  • With an ellipsoid height for a point derived by GPS of 567.4 ft and a geoid separation of 123.8 ft, what is the orthometric elevation for the point?
  • When is a backsight reading typically taken during leveling?
  • Which of the following are land surveying datum types?
  • Topographic Survey locates which types of features?
  • A level surface is defined as which?
  • What characterizes a raw data file in surveying data management?
  • A reduced level is defined as which?
  • Azimuths are defined as what type of angles?
  • Positional accuracy for primary horizontal and vertical control shall be reported as which terms?
  • Cadastral Survey is defined as which of the following?
  • There are how many zones in the continental US according to the text?
  • Which description best defines a route survey in land surveying?
  • What does the Grid Magnetic Angle measure?
  • To what precision should measurements be rounded according to the guideline?
  • In differential leveling, which equation correctly expresses Height of Instrument (HI)?
  • GPS technology uses which of the following technique(s) to determine location coordinates?
  • Gravity anomalies only occur when which of the following Earth contrasts are impacted?
  • Modern geodetic datums range from:
  • The system uses a simple Cartesian coordinate system to specify locations. The error is less than:
  • Which of the following are uses of geodesy?
  • Which equation defines ellipsoid height h in GPS terms?
  • Remote Sensing Control Surveying includes measuring to compute a 3D position for location, orientation, and scale and includes which mapping techniques?
  • Bench mark in surveying refers to which concept?
  • With an ellipsoid height for a point derived by GPS of 1467.4 ft and a geoid separation of -23.8 ft, what is the orthometric elevation for the point?
  • In land surveying, UAS enhance data collection by using sensors that provide high-resolution images or LiDAR, alone or together, enabling what?
  • Vertical datum data are gathered using which methods?
  • What force keeps planet earth in its orbit?
  • Which file format is commonly associated with vector geographic data?
  • What are the two main datums that form the foundation for navigation and transportation in the United States?
  • To meet 2nd Order specifications, which leveling staff specifications are required?
  • Which of the following is a stated goal of the comprehensive plan?
  • Network design aims to maintain a robust statewide control network using high-precision GNSS and geodetic leveling. This network provides the basis for the horizontal and vertical location of what?
  • OPUS is an example of which surveying approach?
  • Meridians are lines joining the poles and are also known as what?
  • Cadastral surveys typically involve which elements?
  • In geodesy, datums are sets of data. Which of the following statements is true?
  • Fast-static surveys differ from traditional static surveys primarily in what aspect?
  • Land survey coordinate systems are affected by which of the following?
  • Which statement correctly describes the foresight (FS) reading?
  • Which statement about bearing notation is accurate?
  • In construction staking, survey markers are referred to as what?
  • Which expression correctly defines Elevation Factor?
  • Which components are typically used together to establish project coordinates in GNSS surveying?
  • Simple three parameter conversions between latitude, longitude, and height in different datums can be accomplished by conversion through Earth-Centered, Earth Fixed XYZ Cartesian coordinates in one reference datum and three origin offsets that approximate differences in rotation, translation and scale.
  • The 'epoch date' refers to the date associated with the coordinates of a control station. An epoch date is a necessary part of a complete datum or reference frame name, because coordinates can change with time.
  • If HI is 125.60 and FS is 9.20, what is the elevation?
  • A level datum is defined as which?
  • OPUS, NOAA's Online Positioning User Service, provides free access to high-accuracy coordinates. Which organization operates OPUS?
  • In a conformal map, which property is preserved locally?
  • Which statement correctly contrasts raster and vector data models?
  • What is the minimum number of NGS first or second order benchmarks used for vertical control?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy